角型光电传感器德国HYDAC贺德克

角型光电传感器德国HYDAC贺德克

输出功能    暗通模式
开关量输出DC电压降zui大值 [V]    2
开关量输出DC的持续电流负载 [mA]    200
用于功能监控输出的当前负载zui大值 [mA]    200
开关频率DC [Hz]    200
电气设计    PNP
短路保护    是
短路保护类型    脉冲
过载保护    是
产品标识    角型光电传感器
尺寸    60 x 10 x 83 mm
侧面长度X    31 mm
侧面长度Y    50 mm
传感器宽度Z    40.31 mm
工作电压DC    10...35 V
电气设计    PNP
输出功能    暗通模式
外壳防护等    IP 67
环境温度    -10...60 °C
原材料    外壳: 模压铸锌; 透镜: 玻璃
连接方式    接插件
显示    开关状态: 1 x LED 黄色; 操作: 1 x LED 绿色; 功能: 1 x LED 黄色
Schaltfrequenz DC max.    200 Hz
光线种类    红外线
产品    易福门或同价值的Instruction

角型光电传感器德国HYDAC贺德克
输出功能    暗通模式
开关量输出DC电压降zui大值 [V]    2
开关量输出DC的持续电流负载 [mA]    200
用于功能监控输出的当前负载zui大值 [mA]    200
开关频率DC [Hz]    200
电气设计    PNP
短路保护    是
短路保护类型    脉冲
过载保护    是
产品标识    角型光电传感器
尺寸    60 x 10 x 83 mm
侧面长度X    31 mm
侧面长度Y    50 mm
传感器宽度Z    40.31 mm
工作电压DC    10...35 V
电气设计    PNP
输出功能    暗通模式
外壳防护等    IP 67
环境温度    -10...60 °C
原材料    外壳: 模压铸锌; 透镜: 玻璃
连接方式    接插件
显示    开关状态: 1 x LED 黄色; 操作: 1 x LED 绿色; 功能: 1 x LED 黄色
Schaltfrequenz DC max.    200 Hz
光线种类    红外线
产品    易福门或同价值的Instruction

> Reaction, result
→ Cross-reference
Important note
Non-compliance can result in malfunctions or interference.he unit must be connected by a qualified electrician.
► The national and international regulations for the installation of electrical
equipment must be adhered to.
► Ensure voltage supply to EN 50178, SELV, PELV.
The following indications apply if there is a UL listing mark on the product:
► For use in NFPA 79 applications only. Adapters providing field wiring
means are available from the manufacturer. Refer to manufacturers
information.
► The device shall be supplied from an isolating transformer having a
secondary Listed fuse rated
a) max 5 amps for voltages 0...20 Vrms (0...28.3 Vp) or
b) 100/Vp for voltages of 20...30 Vrms (28.3...42.4 Vp)
型号    OPL205
> Reaction, result
→ Cross-reference
Important note
Non-compliance can result in malfunctions or interference.he unit must be connected by a qualified electrician.
► The national and international regulations for the installation of electrical
equipment must be adhered to.
► Ensure voltage supply to EN 50178, SELV, PELV.
The following indications apply if there is a UL listing mark on the product:
► For use in NFPA 79 applications only. Adapters providing field wiring
means are available from the manufacturer. Refer to manufacturers
information.
► The device shall be supplied from an isolating transformer having a
secondary Listed fuse rated
a) max 5 amps for voltages 0...20 Vrms (0...28.3 Vp) or
b) 100/Vp for voltages of 20...30 Vrms (28.3...42.4 Vp)
型号    OPL205