漫反射式超声波传感器适应范围HYDAC贺德克

漫反射式超声波传感器适应范围HYDAC贺德克

工作电压 [V]    10...30 DC; (符合cULus - Class 2标准)
电流损耗 [mA]    < 35
防护等    III
反相保护    是
开机延迟时间 [s]    0.1
转换频率 [kHz]    200
输出开关量输出DC电压降zui大值 [V]    2.2
开关量输出DC的持续电流负载 [mA]    100
开关频率DC [Hz]    5
电气设计    PNP
短路保护    是
过载保护    是感应距离 [mm]    80...1200
盲区 [mm]    80
圆柱形孔径角 [°]    ±8
检测范围滞后 [mm]    < 1
90°角度传感器/目标的偏差zui大值 [°]    ± 4
注释    预热时间≥20分钟后达到指示值。
温度补偿    是
迟滞 [%]    < 1
开关点偏移 [%]    -2...2
模拟输出的线性误差 [%]    ≤ 1通信接口    IO-Link
传递类型    COM2 (38,4 kBaud)
IO-Link revision    1.1
SDCI标准    IEC 61131-9
IO-Link Device ID    888 d / 00 03 78 h
外形    Smart Sensor: Process Data Variable; Device Identification
SIO模式    是

漫反射式超声波传感器适应范围HYDAC贺德克

ifm sensors are protected against excessive current by means of a
pulsed short-circuit protection. The inrush current of incandescent
lamps, electronic relays and low resistance loads may cause this
protection to cut in and turn the sensor off.
Ultrasonic reflector The functional specifications refer to a mild steel reflector defined by
ifm at maximum range with dimensions of each side = 300 mm.
Besides mild steel reflectors objects which can reflect sound well can
also be used as a reflector.
The min. reflector size depends on the object size and the angle of
aperture of the sound cone.
Product standard IEC 60947-5-2.
Switch point drift The shifting of the switch point if the ambient temperature changes.
Current consumption Current for the internal supply of DC units.
必需的mater port type    A
处理周期zui小值 [ms]    16EMC电磁兼容    
EN 61000-4-2 ESD    4 kV CD / 塑料
8 kV AD / 金属
EN 61000-4-3 HF电磁场辐射    3 V/m
EN 61000-4-4 Burst    2 kV
EN 61000-4-6 射频场感应的传导抗扰度    3 V
EN 55011    等A
抗振强度    
EN 60068-2-6 Fc    (10-55) Hz 1毫米的幅度，振荡时间5分钟，每轴共振时30分钟或55赫兹
抗冲击    
EN 60068-2-27 Ea    是